During COVID-19 I began dabbling with metal etching, and I grew a bit tired of using a 9V battery as my power supply. After looking at D. Comeau’s ‘Poor Man’s Etching Power Supply’, I decided to remix things and make…
Soldering Station
After spending years always rummaging for the right soldering iron tip, I decided to make an all-in-one station for my soldering supplies. This station features two small holes to pass solder through and is designed to hold a 1lb roll…
License Plate Light Bracket
This bracket is designed to add one surface mount Feniex T3 to a motorcycle license plate. One of my motorcycles was rather limited in space for mounting a light, so this bracket attaches direct to the license plate. I suggest…
Mini Auxiliary Light Bracket
This bracket is designed to add one surface mount Feniex T3 to the project of your choice. I didn’t want to heavily modify my motorcycle’s rear fender, so this attaches with 4 small flush-mounted bolts. I suggest printing this in…
Libraries Stamp
This thoroughly unofficial stamp is based off the older MSU Libraries open book logo. I wanted a close approximation for hand-stamping cards. Although this works best printed with flexible filament, PLA works in a pinch if needed.
Sample Transcript
In this bonus episode, I spoke with Dr. Tina Bucuvalas, the former director of the Florida Folklife Program & State Folklorist from 1996 to 2009. Dr. Bucuvalas worked with communities across Florida to develope public programs to spotlight Florida’s rich…